Fiddes Premier HP Floor Lacquer is a high performance, water based, 1 component self cross linking 100% Polyurethane floor finish. Ideal for the surface treatment of wooden floors in commercial & domestic areas, that are subject to heavy wear. 

Fiddes Premier HP Floor Lacquer has a high resistance to abrasion and wear, and also offers good resistance to liquids in areas of medium to heavy traffic.

Preparation 

Ensure all surfaces are clean, dry, and free from any previous finish. Fill any cracks/knots with Fiddes Floor Filler Gel where required. Sand the substrate with a fine 120/150 grade sanding paper or 120/150 grit sanding disk, removing all traces of dust. 

Application 

Apply an initial coat of Fiddes Premier HP Floor Lacquer evenly and consistently with a roller or good quality brush, following the direction of the grain where possible. 

Once dry, lightly sand and apply a second coat of Fiddes Premier HP Floor Lacquer following guidelines above. 

Once dry, lightly sand and repeat the process for a third application. Fiddes Premier HP Floor Lacquer is re-coatable in 2- 3 hours at normal room temperature. 

3 coats of Fiddes Premier HP Floor Lacquer recommended. 

For optimum performance in areas subjected to heavy wear, add 2% Fiddes Premier Catalyst. 

Cleaning / Maintenance 

For regular light cleaning, a damp cloth should be applied and resulting clean area left to dry. Periodically, an application of Fiddes Floor Surface Cleaner is recommended.

Application: Roller / Brush / Pad

Drying Time: 2-3 Hours at room temperature

Coverage: 8-10 sqm per litre at 120-100g/m2 per coat

Thinners: Water

Coats: Three coats

Sheen: Gloss/ Satin / Matt

Recommended for use on: Floors, Furniture and Panelling.

Packaging: 5lt

Notes

Always test intercoat adhesion on a small area prior to major application.

Longer drying periods may occur during application in cold, damp or humid conditions.

Full cure/hardness will be reached in 7 days.

Store in frost free area.